德国MLS Lanny比例减压阀

德国MIKSCH GmbH 凸轮 齿轮

德国Mink-Bürsten KG mink-buersten 刷具

MTO SERIES

:王工
同号
      449147851
价注意事项：
       1.请发书面询价函（邮件，，传真等），不接受口头报价。
       2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
       3.询价的商友请主动告知公司名称和，谢谢。

YOUR BENEFITS AT
A GLANCE

PRODUCT DESCRIPTION

MTO-ST(F)160(G) oil level indicators are measuring devices with and without switching contacts. They are ideally suited to measuring the liquid level in the conservators of transformers. The level indicator consists of a sensor and a display unit, which are linked separay. The sensor unit consists of a sealed flange plate and is installed directly in the wall of the conservator. The float arm transfers the rise and fall of the float to the spindle. This spindle is connected via a magnetic clutch to a pointer spindle in the display unit.

The movement of the float is normally radial to the casing. The "G" version is recommended for installation in narrow or flat conservators in which only limited movement is possible; in this case the float movement is axial to the casing and the display can be scaled at a ratio of 1:1, 1:2, 1:3 or 1:4.

These level indicators can be supplied with either one or two microswitches:

• MTO-ST160(G): Adjustable limit switch (max. 2 changeover contacts)
• MTO-STF160(G): Fixed limit switch (max. 3 changeover contacts)

Strip brushes:

• Standard strip brushes
  STL

  Perfect sealing, reliable protection against dirt and noise – different geometries for a variety of installation situations

   

  Applications:
  Sealing, Guiding, Gliding, Carrying

  To the shop

• Flex-System
  FBL

  Flexible strip brushes to tape, push or clamp on for different demands

   

  Applications:
  Sealing, Securing, Guiding

  To the shop

• Brush grommet
  STLBS

  Zuverlässiges Abdichten für klimatisierte Doppelböden und als Kabeldurchlass in Schaltschränken

  Applications:
  Sealing, Guiding

  To the shop

Míksch GmbH - cams, cam gears, tool-changing systems

Our cam gears - from cam calculations to cam manufacture - have brought us to the forefront. We manufacture rotary index tables, index drives, tool changers, chain magazines and also disc magazines,tool-changing systems and oscillating drives.

Our cam gears are based on cam calculations. Based on our many years' experience of performing cam calculations and cam manufacture, we develop rotary index tables, pick & place devices and handling units. Our cam gears control the movements of the rotary index tables, index drives and oscillating drives;outputs of the rotary index tables and index drives are controlled by our cam gear technology.

Tool magazines and tool changers also form part of our product offering. Our magazines are chain magazines or disc magazines. We produce chain magazines and disc magazines as standard solutions. These magazines (chain magazines, disc magazines) are optional additional modules to the tool changer. Our tool changers are handling units (pick & place devices) Tool changers and tool-changing systemsaccelerate your production process. For your optimum production process we develop tool changers / handling units and very specific tool-changing systems.

Ask us about customised cam manufacture and the corresponding cam calculations! We also developrotary index tables, chain magazines, disc magazines and tool-changing systems for your based on your own requirements.

Pallet changer · Maltese mechanism · rotary index table · tool-changing system · spur wheel gear · cylindrical cam · oscillating drive · tool magazines · index drive · pick-up magazine · pick & place devices · cam manufacture · cam calculations · handling unit · cam gear · tool changer · tool-changing systems · disc magazine · chain magazine 

Type D

• Proportional valve for harmless* gases
• Outlet pressure range up to 174 psi (12 bar)
• Connections G 1/8
• Valve seat size 3 mm
• Standard flow volume max. 350 Nl/min
• Made of brass or stainless steel
• Seals depending on medium: NBR, EPDM, Viton, Kalrez, PTFE
• Analog control

Type E

• Proportional valve for harmless* gases
• Outlet pressure range up to 725 psi (50 bar)
• Connections G 1/4"
• Valve seat size 6 mm
• Standard flow volume max. 2000 Nl/min
• Made of brass or stainless steel
• Seals depending on medium: NBR, EPDM, Viton, Kalrez, PTFE
• Analog, digital or field bus control