瑞士PETER HIRT GmbH传感器
德国DIATEST Hermann Költgen GmbH孔径量仪
产品系列：
:王工
同号
449147851
价注意事项：
1.请发书面询价函（邮件，，传真等），不接受口头报价。
2.如果型号不能*对上，请提供英文品牌名+具体型号+数量。
3.询价的商友请主动告知公司名称和，谢谢。
DIAWIRELESS
瑞士PETER HIRT GmbH传感器
产品系列：
产品系列：
Ball Cages Balls 1.00 mm
| Ball Cages Balls 1.50 mm
| Ball Cages Balls 2.00 mm
|
Overview of all transducers
|
Download transducer catalogue as PDF
Spring Push |  | | Vacuum Retract | | | Pneumatic Push Bellow Sealed | | | Pneumatic Push Air Gap Seal | | | Cable Exit | | | Description | |
| ||||||||||||||||
| T101F | T101V | T101P | T101L | axial | halfbridge, ±2 mm measuring stroke | |||||||||||
| T102F | T102V | T102P | T102L | radial | ||||||||||||
| T151F | T151V | T151P | T151L | axial | fullbridge, ±2 mm measuring stroke | |||||||||||
| T152F | T152V | T152P | T152L | radial | ||||||||||||
| T151F-024 | T151V-024 | T151P-024 | T151L-024 | axial | LVDT Marposs ® compatible, ±2 mm measuring stroke | |||||||||||
| T152F-024 | T152V-024 | T152P-024 | T152L-024 | radial | ||||||||||||
| T161F | T161V | T161P | T161L | axial | Mahr ® compatible, ±2 mm measuring stroke | |||||||||||
| T162F | T162V | T162P | T162L | radial | ||||||||||||
| T201F | axial | halfbridge, ±1 mm measuring stroke | ||||||||||||||
| T202F | T202V | T202P | T202L | radial | ||||||||||||
| T301F | T301V | T301P | T301L | axial | halfbridge, ±2 mm measuring stroke | |||||||||||
| T302F | T302V | T302P | T302L | radial | ||||||||||||
| T401 | axial | halfbridge, mounting system, ±2 mm measuring stroke | ||||||||||||||
| T402 | radial | |||||||||||||||
| T451 | axial | fullbridge, ±2 mm measuring stroke | ||||||||||||||
| T452 | radial | |||||||||||||||
| T501F | T501V | T501P | T501L | axial | halfbridge, ±5 mm measuring stroke | |||||||||||
| T502F | T502V | T502P | T502L | radial | ||||||||||||
| T521F | T521V | T521P | T521L | axial | halfbridge, ±2 mm measuring stroke with 8 mm after electrical zero, setting 1:2 | |||||||||||
| T522F | T522V | T522P | T522L | radial | ||||||||||||
| T523F | T523V | T523P | T523L | axial | halfbridge, ±2 mm measuring stroke with 8 mm after electrical zero, setting 1:1 | |||||||||||
| T524F | T524V | T524P | T524L | radial | ||||||||||||
| T801 | axial | halfbridge, ±2 mm measuring stroke | ||||||||||||||
| T802 | radial | |||||||||||||||
| T851 | axial | fullbridge, ±2 mm measuring stroke | ||||||||||||||
| T852 | radial |
DC-Transducer
T-series transducer with in-cable box signal conditionning, signal output +/- 10 VDC for full spectification displacement
application | the same as T-series transducers |
body diameter | 8h6 |
dimension | in-cable box 58 x 35 x 16 mm |
supply voltage | supply voltage 5, 12 oder 24 VDC (+/- 10%) (please specify with order) |
signal output | +/- 10 VDC for full specification displacement |
connection | supply and signal output: cable PVC, length 1 m, prepared wires |
models | Transducer T101/T102, measuring stroke +/- 1 mm |
examples for ordering | T101F as DC-Transducer with supply voltage 12V, signal output +/- 10V and measuring stroke +/- 1 mm: |
drawing |
|
T-Modul
signal conditionning electronic for halfbridge transducers, mountable into frontpanels, output signal +/- 10 or +/- 5 VCD, for full specification displacment for the transducer
application | signal conditionning for T-series transducers |
dimension | 31 x 50 mm (no casing) |
fixing | with threaded ring, hole diameter for socket fixing 18 mm |
supply voltage | supply voltage 5, 12 or 24 VDC (+/- 10%) (please specify with order) |
signal output | +/- 10 VDC for tranducers |
connection | supply and signal: pads on PCB |
transducer supply | 3 V +/- 0.5% RSM / 13 kHz +/- 5% |
sensitivity | 73.75 mV/(Vmm) (into R = 2 kOhm +/- 0.1%) |
examples for ordering | T-module with supply voltage 12 V, signal output +/- 10V and measuring stroke +/- 1 mm for a T101: |
drawing |
|
Cable Module
signal conditionning for T-series transducers, socket to accept transducer plug, output signal ±10 VDC or ±5 VDC, for full specification displacement of the transducer
application | signal conditionning for T-series transducer |
dimension | box 73 x 51 x 25 mm |
supply voltage | supply voltage 5, 12 or 24 VDC (+/- 10%) (please specify with order) |
signal output | +/- 10 VDC for transducer |
connection | supply and signal: cable PVC, length 1 m, prepared wires |
transducer supply | 3 V +/- 0.5 % RMS /13 kHz +/-5% |
sensitivity | 73.75 mV/(Vmm) (an R= 2 kOhm +/- 0.1 %) |
examples for ordering | Cable Module with supply voltage 12 V, signal output +/- 5 V and measuring stroke +/- 2 mm for a T101: |
drawing |
|
DIN-Rail Module
signal condition electronic for halfbridge transducers, housed in DIN-Rail case, signal output +/- 10 VDC or +/- 5 VDC, for full specification displacement of the transducer
application | signal conditionning for T-series transducers |
dimension | 86 x 35 x 58 m (height from rail top surface) |
supply voltage | supply voltage 5, 12 or 24 VDC (+/- 10%) (please specify when ordering) |
signal output | +/- 10 VDC for transducer |
connection | supply and signal: screw terminals |
transducer supply | 3 V +/- 0.5 RMS / 15 kHz +/- 5% |
sensitivity | 73.75 mV (Vmm) (an R = 2 kOhm +/- 0.1 %) |
examples for ordering | DIN-Rail Module with supply voltage 12 V, signal output +/- 5 V and measuring stroke +/- 2 mm for a T101: |
Zeichnung |
|
MICRON-Switch
small signal switch with highest repeatability of the crossover position
application | reference switch for position stages |
repeatability | +/- 0.0005 mm |
overtravel | 1.5 mm (longer overtravel upon request) |
operation force | 0.7 N (other values upon request) |
temperature range | -20 to +70 °C, storage and opertation |
current rarting | 50 mA |
lifetime | > 10 Mio. cycles |
mounting position | any |
function | NC (normally closed) |
cable | PUR, length 1m, prepared wires |
wires | 2 x 0.14 mm2 |
body OD | M8 x 0.5 |
case material | stainless steel (1.4305) |
clamping nuts | 2 pieces included |
drawing |
|
Accessories
Tips with fixing thread M2.5
TN10W |
|
TN12 |
|
TN20 |
|
TN30W |
|
TN70 |
|
TN91 X = 15mm |
|
Fixing elements
T100/630 clampbush |
|
|
|
T100/631 clampscrew |
|
Pneumatic Connection
T100/481 nipple, rotaing |
|
|
|
Comparison |
|
Extension Cables
T100/781, 1,0 meter |
|
DIATRON 2200 with radio module
DIAWIRELESS - wireless data transmission via real radio transmission or Bluetooth® to PC or DIATRON.
Both wireless solutions are adjusted to the DIATEST programme. Easy handling and the usual reliability of all DIATEST products are guaranteed Precision by Simplicity!
Radio transmission
- Operating time up to 4,000 hours
- Up to 2,000,000 data transmissions with 2 coin cells
- Operating distance approx. 20 m in production, up to 200 m in free field
- Electronic probes: resolution 0.1 µm
- Extremely high precision: ca. 0.2 µm with linearization
- Eletronic probes: travel 4 mm
- Measured value can be seen on the holder
- Configuration: norminal size mm/inch, auto-power-off
- Type of measurements: min, max, difference, average
- Free Software for data evaluation in Excel
- Easy to use
Bluetooth
- Analogue and digital display of readings
- Up to 7 measurements can be displayed at the PC
- Up to 7 hours continuous data stream
- Resolution up to 0.1 µm
- Electronic probe: digital probe with 10 mm travel
- Type of measurements: static, max., min., difference
- User information: work piece good / not good, change of battery via coloured LED on holder
- Configuration: nominal size, tolerance limits, adjustable ratio, measurement direction, auto-power-off
Outside Diameter Gauge
AMG
ODV
AMG
- Self-centring outside diameter gauge
- Used with mini fixture
- Measuring range: 5 mm to 25 mm/0.2“ to 1“
- Smaller diameters from 1 mm and special designs on request
- Simple calibration with setting discs
- Tungsten carbide contacts
- Repeatability: <= 0.001 mm/ 0.00005“
ODV
- Adjustable snap gauge
- Hand-held gauge
- Application range: 12 mm to 82 mm/0.5“ to 3.25“
- Measuring range: 6.35 mm/0.25“
- Ceramic anvils
- Anti-magnetic design
- Repeatability: <= 0.002 mm/ 0.00008“
Dial Indicator Tester
- Manual checking of indicators
- Travel: 30 mm/1.18“
- Basic elements with clearance free bearing
- Accessories for test indicators and indicators with longer travel (50 mm/80 mm)
- Collet for comparison gauge (e.g. Heidenhain): stem dimension Ø 8 mm, max. height: 150 mm
Crankshaft Gauge
- For checking crankshafts and bearings in situ
- Checking for e.g. radial deviation of crankshaft, bearing clearance etc.
- Application range: web distance 45 mm to 500 mm/ 1.8“ to 19.7“
Checking Stands
MST-58
General
- Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts
- Also suitable in connection with special applications, favoured for use together with DIATEST floating holders
Checking stand MST58
- Measuring stroke adjustable from 0 to 33 mm/1.3“
- Platen: Ø 58 mm/2.3“
- Top of stand continuously adjustable
Maximum height of work-piece including gauge: 140 mm/5.5“
Accessories: clamp-on-vee attachment for positioning of work-piece
Universal stand MST102
- Measuring stroke adjustable from 0 to 130 mm/5.1“ with stop
- Size of platen: 100 mm x 100 mm/4“ x 4“ (larger platen available in standard programme)
- Different jib arms to hold measuring system
- Extensive range of accessories in standard programme
Mini fixture KM
- Especially suitable for measuring small work-pieces in combination with BMD plugs
- Optimal position due to possibility for adjustments and accessories,
- model as gauging station with several mini fixtures side-by-side.
- Suitable for multi-plane plugs
Floating Holders
SH-T
SH-BMD-50 (left), SH-BMD-20 (right)
Floating holders compensate position errors
SH-T
- Floating holder for split-ball probes
- Floating only in one axis
- Especially suitable for small split-ball probes in combination with MST
- Float range: 0 to 1.5 mm/0.06“ continuously adjustable and 3 mm/0.1“ maximum, non variable
- Thread connection: M6 x 0.75
SH-BMD20
- Floating holder for gauging fixtures, suitable for BMD gauge
- Thread connection: M6 x 0.75
SH-BMD30
- Floating in one axis and angular compensation: ± 0.5 mm/tilt angle approx. 3°, suitable for BMD gauge
- Thread connection: M6 x 0.75 or M10 x 1
SH-BMD50
- Floating holder for automatic gauging in machines with BMD gauges
- Max. float range: ± 0.75 mm
- Option: air supply, fine adjustment for electronic probes
- Weight compensation for horizontal application
- Impact safety recoil
- Mounting possibility for proximity switch
- Thread connection: M10 x 1
Offset Heads
- Standard accessories for use in gauging fixtures
- Wide range of applications, built-in holders for gauging fixtures, 90° attachments, extensions, rotary adaptors etc.
Setting Ring Gauge
DIN2250-C
Setting ring gauge: according to company standard or DIN2250-C
采购中心
