Model 7 and Model 7A
FIGURE 1 (Can be mounted on any micropropositioner for use with any probing system.)
PICOPROBE® MODEL 7 was designed as a companion probe to Models 12C and 18C for driving integrated circuit lines so the Model 12C and 18C can be used to measure the response of adjacent nodes. The Model 7 consists of a flexible 6 foot, 50 ohm coaxial cable accurately terminated to 50 ohms in order to avoid undesirable reflections. A special miniature connector receives replacement coaxial probe tips that provide a shielded environment to within 3 mm of the fine tungsten probe point, thus minimizing capacitive coupling to other parts of the circuit. The replaceable coaxial probe tips are offered in various point sizes and can also be bent to any shape in order to accommodate a variety of probing geometries.
PICOPROBE® MODEL 7A, an unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips.High Temperature Option For elevated temperature applications up to 200 degrees C., Picoprobe® Models 7-HT and 7A-HT can be used in place of the Model 7 and 7A, respectively. Models 7-HT and 7A-HT use special temperature resistant probe tips that provide accurate test results under extreme conditions.
Model 7 and Model 7A Replacement Tips Part
NumberTungsten Probing Wire
Shaft DiameterPoint Radius 7-5 5 micron <0.1 micron 7-10 10 micron <0.1 micron 7-22 22 micron <1.0 micron 7-35 35 micron <2.0 micron 7-60 60 micron <3.0 micron 7-125 125 micron <5.0 micron 7-175 175 micron <5.0 micron FIGURE 2 * Specify high temperature tips by adding an "HT" suffix to the Model 7 and 7A replacement tip part number.
深圳市森东宝科技有限公司（Cindbest）是一家专业从事探针台设备的研发、生产和销售，并集成代理相关实验室设备的综合性。主营产品有：探针台、激光测试仪、GGB高频微波探针、蜂窝式光学平台、I-V/C-V参数测试仪、3D白光干涉仪等相关实验室设备，其中探针台系列产品均已获得国家，同时通过运用现代质量管理的科学理念和*方法，我司顺利通过了ISO9001质量管理体系认证，并且为深圳市质量检验协会的理事单位之一。 Cindbest总部位于广东省深圳市，并在香港、上海、长沙、西安、成都等城市均设有销售网点，公司成立至今，已合作过近200家高校（含国内95%的985,211高校），30多家科研院所以及20多家半导体行业大型公司，与此同时Cindbest已成长为国内探针台的主要生产供应商。 公司秉持着“以客户为本，以实现实验目的，助力中国半导体发展为目标”的经营理念发展前行。凭借优秀的产品、高质量的服务、高度认真负责的态度，全面打造公司的核心竞争力，为客户和社会创造价值，赢得了广大客户和社会的*.
光学平台
Model 7 and Model 7A(dc to 500 Mhz, 50 ohm) 产品信息
在找 Model 7 and Model 7A(dc to 500 Mhz, 50 ohm) 产品的人还在看
采购中心
