混合泵，卫生级不锈钢泵系列 返回列表页

    混合泵的吸入口可以利用负压作用吸入气体，所以无需采用空气压缩机和大气喷射器。高速旋转的泵叶轮将液体与气体混合搅拌，所以无需搅拌器和混合器。由于泵内的加压混合，气体与液体充分溶解。所以无需大型加压溶气罐或昂贵的反应塔即可制取高度溶解液。气液比约为1:9(吸气量为8-10%),串联使用可以增加吸气量。一台气液混合泵即可进行气液吸引、混合、溶解并直接将高度溶解液送至使用点。过泵流量 1-50 M3/H;处理水量1-150 M3/H 。因此，使用气液混合泵，可以提高溶气液制取效率、简化制取装置、节省场地、大幅降低初次投资、节省运行成本及维护费用。

折叠






The suction port of the mixing pump can use negative pressure to inhale gas, so there is no need to use air compressors and atmospheric ejectors. The high-speed rotating pump impeller mixes and stirs the liquid and gas, so there is no need for agitators and mixers. Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved. Therefore, it is possible to prepare highly soluble liquid without a large pressurized gas tank or expensive reaction tower. The gas-liquid ratio is about 1:9 (8-10% inhalation), and it can be used in series to increase the inhalation. A gas-liquid mixing pump can carry out gas-liquid suction, mixing, dissolution and directly deliver the highly dissolved liquid to the point of use. The pump flow rate is 1-50 M3/H; the treated water volume is 1-150 M3/H. Therefore, the use of gas-liquid mixing pumps can improve the efficiency of gas-liquid production, simplify the production equipment, save space, greatly reduce the initial investment, and save operating costs and maintenance costs.

折叠应用范围

折叠性能参数