江阴市名正机械有限公司
主营产品: 制药机械 |
江阴市名正机械有限公司
主营产品: 制药机械 |
参考价 | 面议 |
■ 特点 FeAtUrs
◎ 流化床为圆形结构避免死角。
◎ 料斗设置搅拌,避免潮湿物料团聚及干燥时形成沟流。
◎ 采用翻倾卸料,方便迅速*,亦可按要求设计自动进出料系统。
◎ 密闭负压操作,气流经过过滤。
◎ 操作简便,清洗方便,是符合gMP要求的理想设备。
◎ 干燥速度快,温度均匀,每批干燥时间一般均在20-30分钟。
◎ The structure of fluidization bed is round so as to avoid dead corner;
◎ Inside the hopper there is a stir in order to avoid agglomeration of raw material and forming canal of flow;
◎ the granule is discharged through the method of turning over. In this way it is very convenient. The discharging system can be designed as request too;
◎ It is operated at the conditions of negative pressure and seal. The air is filtered. ◎ therefore it is simple in operation and convenient in clean. It is an idea equipment that is in conformity with the requirement of GMP;
◎ the drying speed is fast and the temperature is uniform. In general the drying time is 20~30 minutes.
■ 原理 principle
◎ 空气经加热净化后,由引风机从下部导入,穿过料斗的孔网板。在 工作室内,经搅拌和负压作用形成流态化,水份快速蒸发后随着排 气带走,物料快速干燥。
◎ Purified and heated air is immited from the bottom by fan and passed through the screen plate of hopper. In the work chamber, the state of fluidization is formed through stirring and negative pressure. the moisture is evaporated and removed rapidly and the raw material is dried quickly.
■ 技术参数 technicAl pArAMeters
项 目 | 机 型 | |||||||||
投 料 | kg | 60 | 100 | 120 | 150 | 200 | 300 | 500 | 1000 | |
风 机 | 风 量 | m3/h | 2361 | 3488 | 4000 | 4901 | 6032 | 7800 | 10800 | 15000 |
风 压 | mmH2O | 594 | 533 | 533 | 679 | 787 | 950 | 950 | 1200 | |
功 率 | kw | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 45 | 75 | |
搅 拌 功 率 | kw | 0.55 | 0.55 | 0.55 | 0.55 | 0.55 | 0.75 | 1.1 | 2.2 | |
搅 拌 转 速 | rpm | 11 | ||||||||
蒸 气 耗 量 | kg/h | 141 | 170 | 170 | 240 | 282 | 366 | 451 | 800 | |
操 作 时 间 | min | 15-30 | ||||||||
主机高度 | mm | 2700 | 2900 | 3000 | 3100 | 3300 | 3800 | 4200 | 5800 |