1) Easy regulation and control ,strong adaptability 1.Regulate thickness of materials ,speed of main shaft ,number of rake arm ,atyle of and sizes of rakes to make drying process be optimal .2. Each layer of drying plate can be led thermal or cold media individually to heat or cold materials and make temperature control accurateely and easily .3.Dwelling time of materials can be accuray adjusted .4.single flowing direction of materials without return flowing an dmixing ,even drying and stable quality ,no re-mixing is needed . (2) Easy and simple operation .1 start and stop of dryer is quite simple .2.After materials are stopped feeding and conveying ,they can be easily exhausted out of the dryer by rakes .3.Careful cleaning and observation can be carried inside the equipment through large-scale viewing window . (3) Friendly environment ,solvent can be retrieved and dust powder discharge can meet requirement 1.Normal pressure Style :as low speed of air flow inside the equipment and moisture being high in upper part and low part ,dust powder couldn’t float to the top of the equipment . so there is almost no dust powder in tail gas dischged from the moist discharge portv on the top .2 closed style :equipped with solvent retrieval device that can be used as mosit-carrier gas in closed circulation for those subject to burning ,explosion and oxidation ,and poisonous materials in order for safe operation .Especially suitable for drying of flammable ,explosive and poisonous materials .3.vacuum style :style ;if the plat e dryer is operating under vacuum state ,it is particularly suitable for drying of heat sensutive materals . (4) Easy installation and small ,occupying area .1.As the dryer is in a whole to leave the and to be transported , is quite easy to install and fix in the locatinon only by hoisting .2.As drying plates being arranged by layers and installed vertically ,it takes a small occupying area though drying area is larger. |