进口滑片泵｜美国进口滑片泵

进口滑片泵美国滑片泵

进口滑片泵特性：

*的开放式转子和可自动调节长度的滑片设计,可保证始终如一的流量
桶式密封函及滚珠式轴承保证了zuijia的泵送性能
泵的排水塞可自动排泄杂物,简化了清洁和冲洗的维护
泵在原地即可打开端盖更换叶片,方便维护保养，可选防腐蚀性的镀镍或覆特氟龙材质的弹性体和316不锈钢材质的机械密封，可选配的材质:覆特氟龙材质的弹性体,密封面为青铜材质的机械密封,青铜材质的滑片或液压驱动式.

进口滑片泵工作原理：

滑片泵采用一个有多片滑片的转子, 在离心力的作用下, 流体穿过叶片由吸入口进入泵腔内。转子的持续运转, 泵腔内的流体也随之运动, 在各种机械力和液压力的作用下, 流体被送至出口。每个叶片为流体提供正位移机械和液压推力。

进口滑片泵技术参数：

流量：10-200m3/h
工作压差：0.2-1MPa
zui高工作压力：2.5MPa
吸入极限真空度：0.06-0.09MPa
自吸性能：＜60s/5m
效率：70-85%
转速：300-970r/min
功率：2.2-75kw
输送介质温度：-40～80℃
适用介质粘度值：1～1500cst

进口滑片泵优点：

自吸滑片泵，采用带叶片的转子驱动液体。材质上采用球墨铸铁配合自润滑的叶片。因为其优良的性能，可以传输粘性的和挥发性的液体，相比同等的泵功率更低。 在低转速大流量的传输中更具优势。
快速、低噪音的*使用；
叶片式结构使其性能稳定、*使用。
滑片泵具有以上优点，而且自吸能力强，寿命长，体积小，效率高。在输送汽油、柴油或者类似介质的情况下，滑片泵具有非常大的优势，是自吸式离心油泵和铜轮齿轮泵的替代品。

进口滑片泵美国德国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Sliding vane pump

Inlet vane pump characteristics:

Unique open rotor and automatic adjustment of the length of the slider design, to ensure consistent flow

The bucket sealing and ball bearing ensure the best pumping performance

The drainage pump can be automatically discharge debris, simplifies the maintenance of cleaning and flushing

Pump in place to open end cover replacement blades, easy maintenance, elastic optional corrosion of nickel plated or coated Teflon material and 316 stainless steel mechanical seal, optional material: Teflon coated elastomer material, sealing surface for the bronze material mechanical seal, slide or hydraulic driven bronze material.

Imported sliding vane pump working principle:

The sliding vane pump adopts a rotor with a plurality of sliding blades, and under the action of centrifugal force. The continuous operation of the rotor, the pump cavity of the fluid is also moving, in a variety of mechanical and hydraulic pressure, the fluid was sent to the exit. Each blade provides positive displacement mechanical and hydraulic thrust.

Technical parameters of imported sliding vane pump:

Flow: 10-200m3/h

Working pressure: 0.2-1MPa

Maximum working pressure: 2.5MPa

Suction limit vacuum: 0.06-0.09MPa

Self-priming performance: 60s/5m

Efficiency: 70-85%

Speed: 300-970r/min

Power: 2.2-75kw

Medium temperature: -40 ~ 80 C

Applicable medium viscosity value: 1 ~ 1500cSt

Imported sliding vane pump:

Self suction sliding vane pump, driven by rotor with blades. The material is made of spheroidal graphite cast iron with self lubricating blades. Because of its excellent performance, it can transmit viscous and volatile liquids, which is lower than the same pump power. In the low speed and large flow of transmission more advantages.

Long term use of fast, low noise;

The blade type structure makes its performance stable and no trouble to use.

The sliding vane pump has the advantages of strong self-priming capacity, long service life, small volume and high efficiency. In the delivery of gasoline, diesel or similar medium under the condition of sliding vane pump has a very big advantage, is self-priming centrifugal pump and the copper wheel gear pump replacement.

The United States Germany imported vane pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.