进口水循环真空泵｜美国进口水循环真空泵

进口水循环真空泵｜美国进口水循环真空泵

进口水循环真空泵概述：

在水环泵中，辅助排气阀是一种特殊结构，一般采用橡皮球阀，它的作用是消除泵在运转过程中产生的过压缩与压缩不足的现象。这两种现象都会引起过多的功率消耗。因为水环泵没有直接的排气阀，而且排气压力始终是固定的，水环泵的压缩比决定于进气口的终止位置和排气口的起始位置，然而这两个位置是固定不变的，因而不适应吸入压力变化的需要。为了解决这个问题，一般在排气口下方设置橡皮球阀，以便当泵腔内过早达到排气压力时，球阀自动开启，气体排出，消除了过压缩现象。一般在设计水环泵时都以zui低吸入压力来确定压缩比，以此来确定排气口的起始位置，这样就解决了压缩不足的现象。

进口水循环真空泵工作原理：

循环水真空泵的工作水与被压缩气体是一起排出的．因此水环需用新的冷水连续补充．以保持稳定的水环厚度和温度。水环除起“液体活塞”作用．还有散热(对缩压过程)密封(叶轮与配气板之间)冷却(轴封件)等作用。因此泵的工作转速(对应一定的水环厚度)实际工作水温和配气孔布置是几个主要影响因素．对抽气量、工作效率和压缩比(包括可达真空度)起决定性作用。

进口水循环真空泵技术参数：

抽气量：230-23850m3/h 口径：50-500mm
吸入绝压：33mbar，160mbar
转速：210-1750r/min 电机功率：11-560kw
产品标准：Q/FP201.1-201.3-89(epv DIN28431)
传动方式：联轴器传动、皮带传动

进口水循环真空泵美国泰乐TYLER售后服务：

*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。

Import water circulation vacuum pump imported water circulation vacuum pump

Introduction of imported water circulation vacuum pump:

In the water ring pump, auxiliary exhaust valve is a special structure, the general use of rubber ball valve, which is to eliminate the role of the pump in the process of excessive compression and compression phenomenon. These two phenomena will cause excessive power consumption. Because the water ring pump no exhaust valve directly, and exhaust pressure is always fixed, the compression ratio of the water ring pump depends on the termination of the inlet and outlet position of the starting position, but the two positions are fixed, and therefore does not meet the need of the suction pressure change. In order to solve this problem, the general set of rubber ball valve at the bottom of the exhaust valve, so that when the pump cavity to achieve premature exhaust pressure, the ball valve automatically open, gas discharge, eliminating the phenomenon of over compression. Generally in the design of water ring pump with the lowest suction pressure to determine the compression ratio, in order to determine the starting position of the exhaust port, so that the phenomenon of compression is solved.

Working principle of inlet water circulation vacuum pump:

The working water of the circulating water vacuum pump is discharged together with the compressed gas, so the water ring needs to be continuously replenished by new cold water. In addition to the "water ring liquid piston effect. There are heat (the compression process) (seal between the impeller and the air distributing plate (cooling) seal pieces) etc.. Therefore, the pump speed (corresponding to a certain thickness of the water ring) working temperature and distribution hole layout is the main influence factors. On the content, work efficiency and compression ratio (including to vacuum) play a decisive role.

Technical parameters of imported water circulation vacuum pump:

Exhaust gas: 230-23850m3/h diameter: 50-500mm

Suction pressure: 33mbar, 160mbar

Speed: 210-1750r/min motor power: 11-560kw

Product standard: Q/FP201.1-201.3-89 (EPV DIN28431)

Transmission: coupling drive, belt drive

The United States imported water circulation pump TYLER Taylor customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.