官方微信|手机版|本站服务|买家中心|行业动态|帮助

产品|公司|采购|招标

进口水循环真空泵英国水循环真空泵

参考价面议
具体成交价以合同协议为准
  • 公司名称上海凡而阀门有限公司
  • 品       牌
  • 型       号GRIMM
  • 所  在  地上海
  • 厂商性质代理商
  • 更新时间2017/4/26 16:35:42
  • 访问次数827
在线询价 收藏产品 查看电话 同类产品

联系我们时请说明是 制药网 上看到的信息,谢谢!

上海凡而阀有限公司是一家具有二十多年历史的大型阀门生产企业,是全国Z主要和较大的闸阀、截止阀、球阀、蝶阀、水力控制阀等通用阀门供应商之一。在石油、化工、冶金、电力、建筑、热力、供水等行业具有很高的度及影响力。产品一直供不应求,国内外市场。 

 

上海凡而阀有限公司秉着“以诚为本,互惠双赢的原则,服务于广大客户。全面实行标准化、专业化、科学的管理制度,公司始终坚持诚品求生存,科技求发展的经营方针,在产品品质上以精益求精,追求*为质量方针。

球阀、针型阀、截止阀、闸阀、止回阀、蝶阀、阻火器、排气阀、排泥阀、过滤器、放料阀、隔膜阀、安全阀、旋塞阀、手机:13917909444
进口水循环真空泵
英国进口水循环真空泵Water ring vacuum pump

进口水循环真空泵概述:
进口水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃Z大工作压力(进口压力+泵送压力):1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质。
  一.进口水循环真空泵原理
  进口水循环真空泵高温
进口水循环真空泵英国水循环真空泵 产品信息

进口水循环真空泵

英国进口水循环真空泵Water ring vacuum pump

 

进口水循环真空泵概述:
进口水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃zui大工作压力(进口压力+泵送压力):1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质。
  一.进口水循环真空泵原理
  进口水循环真空泵高温度≤100℃,特殊配置可达150℃,环境温度一般≤40℃zui大工作压力(进口压力+泵送压力):1.0MPa(Hsp≤75m)或1.6MPa (Hsp>75m)特殊配置可分别达1.6MPa或2.5Mpa允许输送介质:清水或物理化学性质类似清水的其他液体密封水管部件:进口压力≥0.03 Mpa 时不安装 结构设计:单级双吸轴向中开涡壳离心泵,卧式安装,驱动机(电动机或内燃机)可根据需要设置在泵的左侧或右侧(即面向出口,驱动机在左侧为逆时针旋转

进口水循环真空泵的特点
  节水效果明显。由于采用水循环作业,加入水箱内的水可循环使用,克服了那种用直接冲放自来水方法获取真空时大量浪费水的现象。经实测,以一个工作日连续作业计算,在达到同样真空度的条件下,使用本产品可节水10吨以上,而且,一次加水,可*使用,这在水源缺乏或水压不足的实验室尤其适用。
  多功能综合作用。本机除可以提供真空条件外,还可同时进行外循环作业,为反应装置提供循环冷却水。本机与自来水源连接,通过适量补充注水源,可以在较长时间连续作业情况下,保持真空循环水温度和水质不变,既可确保真空度下降,又能实现循环冷却水的供应。
  造型新颖,使用方便。本机泵头直接浸入水中,整机高度较低、体积小、重量轻、移动方便、可置于工作台上,便于操作观察,水箱上盖为活式安装,可以打开,便于加水和检修。 本机安装了两个抽气嘴,可单独或同时抽气作业。每个抽气嘴各装一个真空表,可以方便地观察真空度,抽气管路上装有止回阀,可防止抽真空作业意外停机时,循环水回流到被抽真空的设备中去。耐腐蚀、无污染。本机水泵部件采用不锈钢,不受酸碱等腐蚀物的影响;同时不产生任何污染实验室的油污、杂质等。

 

进口水循环真空泵guan网:http://www.twvalve。。net/html/3111.html

 

Inlet water circulation vacuum pump

British imports of water circulation vacuum pump Water ring vacuum pump

Introduction of imported water circulation vacuum pump:

The import of the water circulation pump high temperature are less than 100, a special configuration can reach 150 DEG C, the environment temperature is not higher than 40 DEG maximum working pressure (pump inlet pressure + pressure):1.0MPa (Hsp = 75m) or 1.6MPa (Hsp>75m) special configuration can respectively reach 1.6MPa or 2.5Mpa to allow the transport medium.

Inlet water circulation vacuum pump

The import of the water circulation pump high temperature are less than 100, a special configuration can reach 150 DEG C, the environment temperature is not higher than 40 DEG maximum working pressure (pump inlet pressure + pressure):1.0MPa (Hsp = 75m) or 1.6MPa (Hsp>75m) special configuration can respectively reach 1.6MPa or 2.5Mpa allows the conveying medium: water or other liquids of physical chemistry similar to water sealing pipe parts: the inlet pressure is greater than or equal to 0.03 Mpa when the structure is installed: single stage double suction centrifugal pump axial opening, horizontal installation, drive (motor or diesel) can be arranged on the left or right side of the pump according to the needs (i.e. export oriented, drive on the left side is counterclockwise

Characteristics of imported water circulation vacuum pump

Obvious water-saving effect. Due to the adoption of the water circulation operation, the water in the water tank can be recycled, and the phenomenon that a large quantity of water is wasted when the tap water is directly used to obtain the vacuum is overcome. As a result, in a working day of continuous operation in the calculation, to achieve the same degree of vacuum conditions, the use of this product can be more than 10 tons of water, and a water can be used for a long time, the lack of water or shortage of water pressure is especially suitable for laboratory.

Multifunctional comprehensive action. In addition to providing the vacuum conditions, the machine can also be used for the external circulation operation, which provides the circulating cooling water for the reaction device. This machine is connected with the tap water, the amount of injection water, can be a long time continuous operation conditions, to keep the vacuum cooling water temperature and water quality change, can not only ensure the vacuum degree, and can realize the cooling water supply.

Novel design, easy to use. The pump head is directly immersed in water, the low height, small volume and light weight, easy to move, can be placed on the worktable, easy to observe, the upper cover of the water tank for installation, you can open, easy maintenance and water. The utility model is provided with two suction nozzles, which can be used for single or simultaneous pumping operations. Each suction nozzle is provided with a vacuum gauge, the vacuum degree can be conveniently observed, and a check valve is arranged on the exhaust pipe, and the circulating water can be returned to the device which is evacuated when the vacuum pump is stopped. Corrosion resistance, no pollution. The water pump parts are made of stainless steel, which is not affected by acid and alkali corrosion, and does not produce any pollution to the laboratory.

Imported water circulation vacuum pump Guan net: http://www.twvalve。。net/html/3111.html

 

英国格林代理商上海凡而阀门有限公司,咨询:

 

 

英国格林相关领域业绩:杭州地铁1号线、杭州地铁2号线、杭州地铁4号线,南京地铁1号线、南京地铁2号线、南京地铁3号线、南京地铁4号线、南京地铁10号线。

 

帝国化学工业、美国科氏工业、美国联合能源、艾默生电气、卢克石油、中国海洋石油

 

 

Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.

 

 

同类产品推荐
在找 进口水循环真空泵英国水循环真空泵 产品的人还在看

提示

×

*您想获取产品的资料:

以上可多选,勾选其他,可自行输入要求

个人信息: