进口液压隔膜计量泵｜进口隔膜计量泵

进口液压隔膜计量泵｜美国进口液压隔膜计量泵

进口液压隔膜计量泵技术参数：

流量范围：0.2-16000L/h 压力范围：0.25-50MPa
电机功率：0.37-30kw 额度电压：220V、380V，50HZ、60HZ
驱动方式：两相、三相标准等级或防爆电机 流量控制：手动控制或自动控制(接收4-20mA信号)   连接方式：直管焊接、法兰
过流材质：SS304、SS316L、SS304+PTFE、SS316L+PTFE 隔膜材质：PTFE
柱塞材质：SS304+陶瓷、LSS316L+陶瓷   阀座材质：SS316L
单向阀材质：SS304、SS316L  阀球：ZrO2、陶瓷、SS304、SS316L
防护等级：IP55、IP54   环境温度：-30℃～80℃

进口液压隔膜计量泵概述：

液压隔膜式计量泵采用两种调节方式：一是改变泵的柱塞行程长度，可在停机或运行状态进行。计量精度在土1%以内，用于手动调节的有调量表，千分尺来指示柱塞相对行程值。二是采用变频电机与变频器组合，改变输入的电源频率调节泵速，改变流量大小。此方法适用于自动、遥控及计算管理调节方式。

进口液压隔膜计量泵应用领域：

用于石油、化工、纺织、食品、造纸、原子能技术、电厂、塑料、制药、水厂、环保等工业和*门。用来向加压或常压容器及管道内精确定量输送不含固体颗粒的液体.

进口液压隔膜计量泵美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Hydraulic diaphragm metering pump imported hydraulic diaphragm metering pump

Technical parameters of imported hydraulic diaphragm metering pump:

Flow range: 0.2-16000L/h pressure range: 0.25-50MPa

Motor power: 0.37-30kw voltage: 220V, 380V, 50HZ, 60HZ

Drive mode: two-phase, three-phase standard level or explosion-proof motor flow control: manual control or automatic control (4-20mA signal) connection: straight pipe welding, flange

Over current material: SS304, SS316L, SS304+PTFE, SS316L+PTFE diaphragm material: PTFE

Plunger material: SS304+ ceramic, LSS316L+ ceramic seat material: SS316L

Check valve material: SS304, SS316L valve ball: ZrO2, ceramics, SS304, SS316L

Protection level: IP55, IP54 ambient temperature: -30 C ~ 80 C

Introduction of hydraulic diaphragm metering pump:

Hydraulic diaphragm metering pump using two ways: one is to change the pump plunger stroke length, can be stopped or running state. The measurement accuracy in soil is less than 1%, used for the manual adjustment of a scale to indicate the relative value of plunger stroke micrometer. Two is the use of variable frequency motor and inverter combination, change the frequency of the input power to regulate the pump speed, change the flow size. This method is suitable for automatic, remote control and calculation management.

Application of hydraulic diaphragm metering pump:

For petroleum, chemical, textile, food, paper, atomic energy technology, power plants, plastics, pharmaceuticals, water plants, environmental protection and other industrial and technological sectors. The utility model is used for accuray and quantitatively conveying liquid without solid particles in pressurized or normal pressure vessels and pipelines

The United States imported hydraulic diaphragm metering pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.