工作原理Working principle:
与制粒工艺相配套的组件
Auciliary Parts Related to the Technique of Granulation
物料在锅中运动及主要传动图
Material's Movement¨1 the Pan and Main Transmission Diagram
合适的设备才能取得理想的制粒效果
1、人工加料（标准）
2、通过重力和密闭式加料系统，或通过真空加
料（选件）
3、圆锥形物料槽（标准）转速可无级调节
4、Z型搅拌桨（标准）转速可无级调节
5、切割刀l标准）形状可变，转速可调
6、顶盖通过人工打开，有视窗l HLSG-200-
400为标准件）
7、顶盖通过人工打开，有视窗I HLSG-50为标
准件）
8、过渡带l标准）
9、CLP-现场高压清洁的金属过滤袋（选件）
10、各种加料口及粘合剂喷射系统（选件）
1 1、用于物料槽、出料口、搅拌桨及切割刀密封
部位、过滤袋的CLP清洗系统l选件）
整个过程由混合、制粒两个工序组成。
1、 粉状物料从锥形料斗上方进入物料锅，待料斗关闭后在混合浆的搅拌下，粉料在容器内作选择运动，同时物料沿锥形壁方向变
化，逐步生成液桥。在浆叶和壁筒对物料的挤压、摩擦、捏合的作用下，物料逐步转变为疏松的材质。然后，开启出料门，湿颗粒在
桨叶离心力作用下推动出料斗。
2、 故这些团粒结构的软材料不是通过强制挤压而成粒，而是通过制粒刀的切割．软材在半流动转态下被切割成细小而均匀的颗
粒，实现了物料的互相转变。
The process consists of two programs including mixing and granulation.
1、 Powder metrical can be charged into the material pan from the conical hopper and continue to rotate in the container under
the action of mixing blade once the hopper is closed. In the maanwhile, all materials grow up the shape of liquid bridge under
continuous effects of conical tank wall. Under the action of extrusion, friction as well as crumb by blade and conical tank wall, all
material is gradually turn for loosen. At last, while opening the hopperoutlet, waterish particles are pushed off under the
centrifugal effects of blade.
2． These soft particles are formed not dependent on forced extrusion effects, more exactly; mainly these small and uniform
particles are formed after continuous cutting under the simile-liquid state. The machine can realize the mutnal transformation
between different materials.
技术参数TechnlcaIDate:
型 号Modd HX-50 HX-100 HX-250 HX-300 HX-400 HX-600
工作容量Sawice Capaaly(L) 12-35 25-70 80-120 130-180 150-280 200-400
每批制料【机动）时间Trrraof granulatingrbatch 混合约2分钟，制粒约7-14分钟，}比Mixing:2mins g ranulating:7-1 4mins/batch
搅拌机转速Speed of stimng paddb 25-500 30-250 30-250 30-220 30-200 30-200
搅拌浆马达功率Powarof stirring pache matortkw) 5.5 7.5 15 18.5 22 30
切割刀转速Rational speed of alter 50-3000转，分
切割刀马达功率Powarof cultar motor(kw) 1.5 3 4 7.5 7.5 1 1
外形尺寸OveraIISiza(YVWHXmm) 1530*620*'980'"1020**1100'*1400*'1550-2550
出料口高度Height of dscharge(mm) 780 920 920 980 1050 1 100
重 量Weight(kg） 3600
采购中心
