PKL150颗粒计数器
仪器采用光阻法（遮光法）原理研制，用于检测液体中固体颗粒的大小和数量,可广泛应用于航空、航天、航发、重工机械、电力、石油、化工、交通、港口、冶金、机械、汽车制造等领域，对液压油、润滑油、岩页油、变压器油（绝缘油）、汽轮机油（透平油）、齿轮油、发动机油、航空煤油、水基液压油等油液进行固体颗粒污染度检测，及对有机液体、聚合物溶液进行不溶性颗粒的取样检测。
性能特点：
采用光阻法（遮光法）原理，具有检测速度快、抗干扰性强、精度高、重复性好等优点。
高精密传感器保证高分辨率力和准确性。
精密注射器式取样系统，实现取样速度恒定和取样体积精确控制。
正/负压气压舱装置，实现样品脱气和高粘度样品检测。
彩色液晶触摸屏，触摸操作、简单方便。
内置NAS1638、ISO4406、GJB420B、GJB420A、AS4059F、GB/T14039、SAE749D、ROCT17216、DL/T432、ASTMD7619、IP564、SH/T0868等颗粒污染度等级标准，并可根据用户要求内置所需标准。
可设置9900个粒径，便于进行颗粒度分析。
可同时存储四条校准曲线（乳胶球校准曲线、ACFTD校准曲线、ISOMTD校准曲线、GOST校准曲线），并可轻松切换，降低换算的误差。
检测数据存储功能，方便检测数据的存档、检索和分析。
内置打印机，可直接打印出检测报告。
内置中文输入法，实现检测报告中文标注。
RS232接口及功能强大的数据软件，可实现外接计算机工或上位机对仪器的控制及对检测数据的处理。
具有磁力搅拌功能，使颗粒均匀分布。
气压泵装置配有气体过滤净化系统，避免了对样品的污染。
技术指标：
光 源：半导体激光器
粒径范围：0.8μm～600μm（取决于选用的传感器）
灵 敏 度：0.8μm（ISO4402）或3μm（c) （GB/T18854，ISO11171）
检测通道：16个，可间隔0.01μm任意设定粒径尺寸
取样体积：0.2～100ml，间隔0.1ml
取样体积相对误差：优于±0.5％
检测速度：5～80mL/min
清洗速度：5～80mL/min
分 辨 力：优于10%(GBT18854-2002，ISO11171)
重合误差极限：12000～40000粒/mL（取决于选用的传感器）
颗粒计数重复性：RSD<>
颗粒计数相对误差：±5%
气压舱真空：-0.08MPa
气压舱压力：1MPa
检测样品粘度：≤650cSt
检测样品温度：0℃～80℃
工作温度：0℃～60℃
储存温度：-30℃～80℃
供 电：100～245V,49～62Hz
外形尺寸：主 机 430×320×590mm
气压泵 330×266×255mm
仪器净重：主机30kg，气压泵10kg
PKL150 particle counter
The instrument is developed using the principle of photoresistance (shading method), used to detect the size and number of solid particles in liquids, and can be widely used in aviation, aerospace, aviation, heavy industry machinery, power, petroleum, chemical industry, transportation, port, metallurgy, In the fields of machinery and auto manufacturing, the hydraulic oil, lubricating oil, rock shale oil, transformer oil (insulating oil), steam turbine oil (turbine oil), gear oil, engine oil, aviation kerosene, water-based hydraulic oil, etc. Solid particle pollution degree detection, and sampling and detection of organic liquid and polymer solution insoluble particles.
Performance characteristics:
Adopting the principle of photoresist method (shading method), it has the advantages of fast detection speed, strong anti-interference, high precision and good repeatability.
High-precision sensors ensure high-resolution force and accuracy.
Precision syringe sampling system to achieve constant sampling speed and precise control of sampling volume.
Positive / negative pressure pneumatic chamber device to achieve sample degassing and high viscosity sample detection.
Color LCD touch screen, touch operation, simple and convenient.
Built-in NAS1638, ISO4406, GJB420B, GJB420A, AS4059F, GB / T14039, SAE749D, ROCT17216, DL / T432, ASTMD7619, IP564, SH / T0868 and other particle pollution degree standards, and can be built according to user requirements.
9900 particle sizes can be set to facilitate particle size analysis.
Four calibration curves (latex ball calibration curve, ACFTD calibration curve, ISOMTD calibration curve, GOST calibration curve) can be stored at the same time, and can be easily switched to reduce the conversion error.
Test data storage function, convenient for archiving, retrieval and analysis of test data.
Built-in printer, can directly print out the test report.
Built-in Chinese input method to realize the Chinese labeling of the test report.
RS232 interface and powerful data software can realize the control of the instrument and the processing of the detection data by the external computer or the host computer.
With magnetic stirring function to make the particles evenly distributed.
The pneumatic pump device is equipped with a gas filtration and purification system to avoid contamination of the sample.
Technical index:
Light source: semiconductor laser
Particle size range: 0.8μm ～ 600μm (depending on the selected sensor)
Sensitivity: 0.8μm (ISO4402) or 3μm (c) (GB / T18854, ISO11171)
Detection channels: 16, the particle size can be arbitrarily set at intervals of 0.01μm
Sampling volume: 0.2 ～ 100ml, interval 0.1ml
Relative error of sampling volume: better than ± 0.5%
Detection speed: 5 ～ 80mL / min
Cleaning speed: 5 ～ 80mL / min
Recognition: better than 10% (GBT18854-2002, ISO11171)
Coincidence error limit: 12000 ～ 40,000 grains / mL (depending on the selected sensor)
Particle count repeatability: RSD <>
Relative error of particle counting: ± 5%
Maximum vacuum of air pressure cabin: -0.08MPa
Maximum pressure of air pressure cabin: 1MPa
Test sample viscosity: ≤650cSt
Test sample temperature: 0 ℃ ～ 80 ℃
Working temperature: 0 ℃ ～ 60 ℃
Storage temperature: -30 ℃ ～ 80 ℃
Power supply: 100 ～ 245V, 49 ～ 62Hz
Dimensions: main machine 430 × 320 × 590mm
Pneumatic pump 330 × 266 × 255mm
Net weight of the instrument: 30kg of host, 10kg of pneumatic pump
采购中心
