■ 特点 FeAtUres
◎ 热风多次穿过物料层与物料逆向流动，使热交换充分，热效率高。
◎ 结构紧凑，占地面积小。
◎ 物料在床内停留时间可调节,操作方便。
◎ 物料沿螺旋床自下而上作圆周运动的同时，自身也产生跳跃，从而增加了物料与热风的接触，增强了干燥效果。
◎ 连续的进出料适合于流水线，并且易达到"gMP"规范，可代替传统的箱式干燥。
◎ 对物料的表面及形状基本没有损伤，不仅保证了丸剂的圆度，而且大大的降低了丸剂的破碎率。 ◎ Because the hot air passes through the layer of raw material several times and acts counter motion towards the raw material,the heat exchanges is fully used and thermal efficiency is high.
◎ the structure is compact and it occupies small area.
◎ the stay time of raw material in thehelix bed ca be adjusted and the operation is very convenient.
◎ the raw material acts the motion of circle at helix bed from up to low,at the same time the equipment can jump itself,so the contact surface between hot air and raw material is increased too and the dry effects is strengthrned.
◎ the equipment is suitable for continuous operation because of continuous feeding and discharging raw material .Meanwhile it is easy to meet the requirements of "gMP".
◎ It does not damge the surface and shape of raw material basically.It can not only maintain the roundness of pill but also decrease the broken rate of pill.
■ 技术参数 technicAl pArAMeters
| 型号 | LZG-1.0 | LZG-1.2 | LZG-1.4 | LZG-1.6 | LZG-1.8 | LZG-2.0 |
| 直径（mm） | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 |
| 振动电机功率（kw） | 2×0.8 | 2×0.8 | 2×1.5 | 2×1.5 | 2×2.2 | 2×3 |
| 外形尺寸（m） | 1.2×1.2×2.7 | 1.4×1.4×2.7 | 1.6×1.6×3.3 | 1.8×1.8×3.3 | 2.0×2.0×3.3 | 2.3×2.3×4.2 |
| 重量（kg） | 1400 | 1680 | 2800 | 3100 | 3800 | 4300 |
| 生产能力（kg/h） | 80-120 | 120-200 | 200-280 | 280-350 | 350-450 | 400-500 |
| 进风温度（℃） | 60-200 | 60-200 | 60-200 | 60-200 | 60-200 | 60-200 |
| 风量（m3/h） | 1487 | 2380 | 3721 | 4462 | 5960 | 6800 |
| 风机功率（kw） | 4.1 | 7 | 7.7 | 14 | 24 | 30 |
该机型的螺旋层数根据用户的需求定（一般取5-12层之间）。
the screw layers of this dryer is desigred id desigred and manufactured according to clients’ requirements（usually 5-12 layers）
采购中心
